Skip to Content
Kenall Manufacturing - Homepage
Main Content

FNL6S

Millenium Finite Cutoff for Architectural High Abuse

FNL6S Main Image
FNL6S Main ImageFNL6S ConnectorFNL6S Continuous Row MountFNL6S Continuous Row Mount
Model #: FNL6S
Features:
  • Surface mount – wall; 6"×48"
  • Extruded aluminum housing with end caps
  • Peace of Mind Guarantee® against breakage
Application(s):Parking Garage
Parks and Recreation
Multifamily Housing
Walkways
Schools and Universities
Corridors
Exteriors and Entryways
Lens Type(s):Clear Prismatic Polycarbonate
Pearlescent Polycarbonate
Lamp Type(s):LED
Linear Fluorescent
Size(s):6"
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalAvailable 3500K, 4000K and 5000K color temperatures, 82 CRI. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 10-100% range, maximum driver source of 500 μA.Optional embedded microwave motion sensor (MS) has factory default settings of 20 minute time out, dims down to 30%. Consult factory for flourescent options.
HousingMarine grade aluminum. Extruded body with die-cast end caps. Post assembly TGIC polyester powder coat finished – 5-step pre-treatment. Each linear run of luminaires consists of one Beginning of Run Luminaire (B), one or multiple Middle Luminaire(s) (M), and one End of Run Luminaire (E). Specify and/or order systems per linear run (i.e. (1)B48, (5)M48, (1)E48).
NOTE: Contact factory for custom lengths.
InstallationStandard four-point mounting per fixture required for Peace of Mind Guarantee®. Fixture can be inverted for uplight (damp location only.)16-gauge stainless steel quick mount plate bolts to wall (fasteners by other), fixture attaches to mounting plate with quick mounting hook-and-lock mechanism and locked into place with captive Torx® (or optional Phillips head) screws, which are concealed but accessible from bottom.
LensUV-stabilized, high impact clear or pearlescent polycarbonate. Diffused pearlescent polycarbonate standard with LED lamp options. Smooth exterior. Nominal thickness .125". Lens securely positioned in body with L brackets, sealed with closed cell gaskets.
ListingsLuminaire is certified to UL Standards by Intertek Testing Laboratory for wet location. ETL certified IP64 per IEC 60598. IESNA-designated full cut-off. IDA-Approved™ Dark-Sky Friendly Fixture. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory.
Lumen DataFNL6S Lumen Data
ReflectorFull reflector/wire cover – 92% reflectivity.
SocketsShock-resistant sockets with internal locking collar to ensure positive lamp retention.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater. Polycarbonate lens and standard four-point mounting to wall required for Peace of Mind Guarantee®.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

Downloads

Product Documentation

Installation Files

Photometry (IES)

Additional Resources

top