Skip to Content
Kenall Manufacturing - Homepage
Main Content

LPS5MRI

Low Profile Sconce

LPS5MRI Main Image
LPS5MRI Main Image
Model #: LPS5MRI
Features:
  • Surface wall mount, non-ferrous construction
  • One-piece die-cast aluminum frames with edge-lit LED lamp source
  • Optional decorative lens materials
  • Wall backlight on damp location configurations
  • Simple-to-clean construction—meets NSF2 requirements
Application(s):MRI Imaging Suites
Lamp Type(s):LED
Size(s):12"
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Electrical24VDC luminaire input from remote-mounted, 120-240VAC, high-power-factor power supply (MRIPS-312, ordered separately). Dimming controlled through 0-10V dimmer (supplied by others). Dimming range down to 10% light output.
HousingMarine-grade die-cast aluminum frame. Frame serves as LED heat sink. Die-formed and welded aluminum driver enclosure, TGIC polyester powder coat finish with five-step pre-treatment; salt-spray test 1,000 hours. See Ordering Information for available finishes. Closed-cell gasketing at all housing interfaces.
InstallationOne (1) fastener secures frame assembly to mounting plate. Mount over junction box by four-point anchors (hardware by others). All power and signal wiring must be completely shielded in continuously grounded aluminum conduit. Light engine and internal driver are replaceable post-installation. MRI room EMI filters required (supplied by others).
ListingsLuminaire is certified to UL Standards by Intertek Testing Laboratory for Damp Location. NSF2 Splash/Non-Food Zone. ADA compliant. Optional Wet Location rating and IP64 rating per IEC 60598. Photometry tested to the IESNA LM-79 standard by an ILAC/ISO17025 accredited laboratory.
Lumen DataLPS5MRI Lumen Data
NoteCustom decorative lenses and color-coordinated custom color frames are available.
OpticalInternal laser-etched acrylic light guide for uniform luminance from edge-lit LED light source. Thin film polycarbonate diffuser; white appearance when unlit (standard outer lens). Optional decorative lens finishes are internally laminated with a matte outer finish. Softly- illuminated wall backlight on damp location products.
Patentpatent: U.S. Patent No. 8,575,841, No. D687,177 S, No. D687,178 S.
WarrantyScanSafe Guarantee™ provides a one year warranty against MRI room interference and susceptibility. One (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater. Warranty is void if all wiring is not shielded in continuously grounded aluminum conduit.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

Downloads

Product Documentation

Installation Files

Photometry (IES)

Additional Resources

top