Skip to Content
Kenall Manufacturing - Homepage
Main Content

MOS18

Millenium OS

MOS18 Main Image
MOS18 Main Image
Model #: MOS18
Features:
  • Diffused LED source reduces glare while maintaining high optical efficiency
  • Standard occupancy sensor with dimming capability up to 90%
  • Wet Location Listed and IP65 rated
  • 2,250 lumen and 4,450 lumen configurations
  • Vandal resistant for high abuse areas
  • Designed to meet NFPA101 standards
Application(s):Parking Garage
Stairwells
Schools and Universities
Corridors
Exit
Emergency
Lens Type(s):Textured Acrylic
Textured Polycarbonate
Lamp Type(s):LED
Size(s):18"
Listings:    
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ControlsIntegral occupancy sensor utilizes 5.8GHz High-Frequency Doppler (HFD) technology for enhanced coverage area and reduced temperature sensitivity in stairwells compared to passive infrared (PIR). Completely enclosed sensor maintains Wet Location listing and IP65 rated. EMC compliant to FCC CFR Part 15. Adjustable settings for coverage sensitivity, time-out period (10s-30min) and standby dimming level (50%-10% output). Occupancy sensor can be optionally deleted for use with centralized, 0-10V dimming based control systems such as Kenall SmartSense™.
ElectricalReplaceable mid-power LED array. See Ordering Information for color temperature and CRI options. 120-277VAC, 50/60Hz input with replaceable high power factor electronic constant-current dimming driver (<20% THD, >0.90 PF). Minimum 85% driver efficiency. EMC compliant to FCC CFR Part 15. Standard 20KV/KA surge protection to IEEE/ANSI C62.41 Cat. A.
HousingMarine-grade die-cast aluminum and injection-molded polycarbonate construction. Integral aluminum heatsink with concealed air inlet and convection fins. TGIC polyester powder coat finish with five-step pre-treatment; salt-spray test 1,000 hours. See Ordering Information for available finishes. Closed-cell neoprene self-adhesive gasket seals housing to mounting surface. Closed cell silicone gasket seals diffuser to housing.
InstallationSurface-mount to ceiling or wall. Four point mounting required for Peace of Mind Guarantee™. -20°C to 25°C ambient temperature rated unless otherwise noted.
LensUV-stabilized, high-impact resistant, injection molded clear textured 100% DR acrylic or polycarbonate diffuser. ≥97% efficiency on internal reflector. Lens secured with four Torx® fasteners.
ListingsLuminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location. IP65 rating per IEC 60598. ADA compliant.
Lumen DataMOS18 Lumen Data
PhotometricsPhotometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory.
WarrantyLimited five (5) year warranty.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

Downloads

Product Documentation

Installation Files

Photometry (IES)

Additional Resources

top