Skip to Content
Kenall Manufacturing - Homepage
Main Content

MSDIC13

Indigo-Clean

MSDIC13_HS01.png
MSDIC13_HS01.png
Model #: MSDIC13
Features:
  • Low-profile, 13” diameter surface ceiling-mounted luminaire
  • White Disinfection mode providing 2,432 lumens of white light
  • Indigo Disinfection Mode providing concentrated disinfection for high-contamination areas
  • Integral motion sensor for control of occupancy-based operational mode
  • Simple installation over recessed junction boxes or existing recessed cans
Application(s):Locker Rooms
Restrooms
Nursing Stations
Schools and Universities
Corridors
Gymnasiums and Multipurpose Rooms
Field Hospital
Size(s):13" DIameter
Listings:    
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ControlsEmbedded microwave occupancy sensor with factory programmed 15-minute time-out. White Disinfection Mode during periods of occupancy and Indigo Disinfection Mode for periods of vacancy. Microwave sensing operates at 5.8 GHz (continuous-wave radar) and provides 360° coverage at various mounting heights and coverage areas.  Sensitivity adjustment is via optional TL50-RC1 remote controller, sold separately.
HousingMarine-grade die-cast aluminum and white injection-molded polycarbonate construction.  White TGIC polyester powder coat finish with 5-stage pre-treatment on baseplate.
Light EngineLED array with individually-controlled 405nm Indigo and white disinfection LED circuits. Second-generation LED providing single-source white disinfection spectrum.  Available 3500K and 4000K color temperature on black-body locus.  80CRI minimum.  120-277VAC, 50/60Hz electrical input with serviceable constant-current driver (>0.90 PF, <10% THD). Minimum 85% driver efficiency.  Flicker-free 0-10V dimming during White Disinfection Mode with 0.1-100% range and dim-to-dark capabilities (maximum 100µA source current).  Meets IEEE PAR 1789-2015 and CEC Title 24 JA10 dimming requirements.
ListingsLuminaire is certified to UL standards by Intertek Testing Laboratory for Damp Locations.  Optional Wet Location and IP64 rating per IEC60598.
OpticalHigh-efficiency mixing chamber design for White Disinfection Mode.  Diffused polycarbonate outer lens.  Internal collimating optics on 405nm LEDs to provide concentrated high-irradiance light during Indigo Disinfection Mode.
PatentIndigo-Clean products and technology covered by U.S. Patent No. US 9,039,966 and US 8,398,264. Product may also be covered by patents found at www.kenall.com/patents. Other patents pending.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For photometric information, go to www.kenall.com.
WarrantyLimited five (5) year LED warranty.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

Downloads

Product Documentation

Installation Files

Photometry (IES)

Additional Resources

top