Skip to Content
Kenall Manufacturing - Homepage
Main Content

MLHA5S

Millenium Stretch

MLHA5S Main Image
MLHA5S Main Image
Model #: MLHA5S
Features:
  • Surface mount – ceiling or wall; 5"×48"
  • Extruded aluminum housing with decorative end caps
  • Low-profile –ADA compliant
  • Peace of Mind Guarantee® against breakage
Application(s):Parks and Recreation
Kitchen and Food Prep
Locker Rooms
Multifamily Housing
Walkways
Washrooms (Correctional)
Restrooms
Stairwells
Showers
Schools and Universities
Transportation Platforms
Foyers and Lobbies
Corridors
Sally Ports
Exteriors and Entryways
Gymnasiums and Multipurpose Rooms
Natatoriums
Lens Type(s):Clear Prismatic Polycarbonate
Pearlescent Polycarbonate
Lamp Type(s):LED
Size(s):5"W
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalAvailable 3500K, 4000K and 5000K color temperatures, 82 CRI. 120-277VAC and 347VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities; maximum driver source of 165μA. Consult factory for flourescent options.
End Caps/BandsMarine grade die-cast aluminum. Four end cap styles available: Flat, Rounded, Reveal and Stepped. Conduit/Wiremold™ knockout visible only from interior of end cap (for Flat and Rounded styles only).
HardwareFour stainless steel, tamper-resistant Torx® with center pin fasteners secure lens in housing body's lens channel.
HousingMarine grade aluminum. Extruded body with die-cast end caps. Housing, with end caps, post assembly TGIC polyester powder coat finished – 5-step pre-treatment. See Ordering Information for standard, optional, architectural and custom finishes. Each linear run of luminaires consists of one Beginning of Run Luminaire (B), one or multiple Middle Luminaire(s) (M), and one End of Run Luminaire (E). Specify and/or order systems per linear run (i.e. (1)B48, (5)M48, (1)E48). NOTE: Contact factory for custom lengths.
InstallationStandard four-point mounting per fixture required for Peace of Mind Guarantee®.
LensUV-stabilized, high impact extruded clear or pearlescent polycarbonate. Smooth exterior, linear prismatic interior. Nominal thickness .156". Lens securely positioned in body channels and end caps. Lens locked in place with tamper-resistant stainless steel Torx® with center pin fasteners and sealed with closed cell gaskets.
ListingsListed to UL Wet Location IP64 per IEC 60598 – ceiling mount. Corner, horizontal wall, vertical wall and pendant mount installation – damp location only. ADA compliant. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory.
Lumen DataMLHA5S Lumen Data
PatentNo. 6,984,055; No. 7,494,241; No. 8,550,656.
ReflectorFull reflector/wire cover – 92% reflectivity.
SocketsShock-resistant sockets with internal locking collar to ensure positive lamp retention.
WarrantyLimited ten (10) year warranty for LED Lamps.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

Downloads

Product Documentation

Installation Files

REVIT Files

Additional Resources

top